Home / Shop / / AirCurve™ 10 VAuto BiLevel Machine with HumidAir™

AirCurve™ 10 VAuto BiLevel Machine with HumidAir™

$1,726.00 $2,495.00 save $769.00

AirCurve™ 10 VAuto BiLevel Machine with HumidAir™

AirCurve™ 10 VAuto BiLevel Machine with HumidAir™

$1,726.00 $2,495.00 save $769.00

Five reasons to buy now.

30-day satisfaction guarantee [1]

Buy now, pay later from 0% APR [2]

Free
shipping [3]

Unlimited
support

Price match guarantee

description

AirCurve™ 10 VAuto BiLevel Machine with HumidAir™ Heated Humidifier is an auto bilevel machine with a built in heated humidifier capable of self-adjusting the humidification level based on the temperature of the room.

 Features

  • AutoSet Algorithm
  • Built In HumidAir™ Humidifier
  • ClimateLineAir™ Heated Tube
  • Pressure Relief Technology
  • Vsync Leak Management
  • TiControl Feature
  • My Options Color LCD Display
  • Light Sensor
  • Advanced Data

AutoSet Algorithm 
ResMed developed an advanced algorithm technology for bilevel therapy to continuously monitor breathing in order to adjust the inhalation and exhalation pressure breath by breath. Adjusting the delivered pressure based on the needs of the user increases the comfort of the therapy while maintaining an open airway.

HumidAir™ Heated Humidifier and Optional ClimateLineAir™ Heated Tube 
The HumidAir™ humidifier is built into the AirCurve™ 10 machine taking up limited space on a bedside table. Easily adjust the humidification level using the My Options screen on the machine. To set the amount of moisture added to the air stream, select level 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest. If humidification is not desired, turn the humidifier off entirely.

The ClimateLineAir™ Heated Tube can be added to the therapy system to optimize humidification. Select the "Auto" function on the AirCurve 10 VAuto to allow the Climate Control system to set for the optimum humidification with minimal rainout condensation. The system considers the temperature of the room air to deliver the optimum level of humidification. Please Note: The ClimateLineAir™ tube is 78 inches in length.

Pressure Relief Technology

  • EPR™: When the AirCurve™ 10 VAuto is set in CPAP Mode, the machine offers Expiratory Pressure Relief (EPR™) to help therapy feel more natural. ResMed's EPR™ feature adjusts the amount of pressure delivered during exhalation and inhalation. The feature can be turned off, or set to Level 1, Level 2, or Level 3. Level 1 is the smallest change between inhalation and exhalation, while Level 3 is the largest change in pressures.
  • Easy-Breathe: In S Mode, the machine uses Easy-Breathe technology to mimic the user's breathing pattern to help create a more familiar sleep experience.
  • Automatic Adjustments: When placed in Auto Mode only, the machine is designed to automatically adapt the pressure as needed.
  • Ramp: In CPAP Mode, this feature gradually increases the pressure in increments before reaching the prescribed pressure. This is intended to help the user acclimate to the pressure and fall asleep with greater ease. In VAuto, S, ST and T Modes, the expiratory pressure increases from the starting EPAP to the prescribed pressure.

Vsync Technology 
Vsync monitors mask leaks throughout the night and compensates by adjusting the baseline pressure to maintain therapy effectiveness.

TiControl Feature
The TiControl feature on the AirCurve VAuto machine monitors the pattern of inhalation and exhalation, comparing it against the TiMax and TiMin settings on the machine. Those with respiratory disorders such as COPD or obstructive lung disease may experience early or delayed changes from inspiration to expiration, referred to as cycling. The 10 VAuto BiLevel TiControl feature is designed to prevent cycling by setting a minimum and maximum time limit on inspiration. When the machine detects the user breathing which falls outside the machine settings, it will intervene to alter the timing of the delivered IPAP (inhalation) or EPAP (exhalation) pressure.

TiControl Settings:

  • Ti Max: Maximum length of Inhalation
  • Ti Min: Minimum length of Inhalation
  • Trigger: Sensitivity level for inhalation trigger
  • Cycle: Sensitivity level for exhalation

LCD Display with My Options 
The AirCurve™ 10 VAuto has a color LCD display. The menus are designed to be easy to read and use. Select the menu item on the screen by turning the easy grip dial. Select the My Options menu to view and modify the current settings:

  • Ramp time - Ease into therapy with a period of lower pressure. Or select AutoRamp™ and the machine senses and adjusts when sleep begins.
  • Humidity Level - Set humidity between 1 (lowest) & 8 (highest), or turn it off.
  • Mask Fit - Runs a seal integrity check showing a green smiling face for a good fit or red frowning face for a poor fit.
  • Leak Alert- Set the device to begin beeping when a large leak is detected or the mask is removed.
  • SmartStart™ - Therapy automatically starts when it senses breathing.
  • Mask Type - Set the mask type being used: Nasal; Nasal Pillow; Full Face Mask.
  • Run Warmup - Preheat the humidifier water before starting therapy.

Light Sensor 
The AirCurve™ 10 includes an integrated light sensor to adjust the machine screen light level. The sensor reads the light in the room and adjusts the screen brightness automatically. Once the lights in the room are turned off, the machine screen dims. After a few seconds the machine screen goes dark.

Advanced Data
The AirCurve™ VAuto records the therapy information on the machine's on board memory. The data can be downloaded to the included SD card. The machine's on board memory holds compliance information for 365 sessions of use as well as detailed data for 30 sessions.

Physical Specifications

  • Dimensions: BiLevel with Chamber: 4.57 x 10.04 x 5.91 Inches
    External Power Supply:  5.50 x 1.88 x 1.25 Inches
  • Weight:  BiLevel with Chamber: 2.75 Pounds
    External Power Supply = 1.30 Pounds
  • Materials:  Not Made with Natural Rubber Latex

Performance Specifications

  • Therapy Modes: CPAP, BiLevel, VAuto, Auto-BiLevel
  • Pressure Range:  4-25 CM H2O
  • Ramp Feature:  Standard Ramp User Adjustable 0 to 45 Minutes
  • Ramp Start Pressure:  4 to Minimum Therapy Pressure
  • Sound Levels:  S26.6 dBA
  • Altitude Adjustment:  Automatic Up To 8500 Feet
  • Compensation for Leak: Automatic
  • Auto On/Off: SmartStart & Stop
  • Comfort Technology: Easy-Breathe, EPR (Depending on Current Device Mode)
  • Rainout Reduction:  ClimateControl with optional ClimateLineAir Heated Tubing
  • Filters:  Disposable (Standard & Hypoallergenic Available)
  • Alarms:  On Screen Messages Including High Leak Detected, Water Tub Not Inserted Properly, Air Tubing May Not Be Connected Properly, Mask May Be Fitted Incorrectly, Tubing Blocked, System Fault, Air Filter May Be Blocked, etc.

Compatibly

  • Mask Interfaces:   Compatible with all CPAP & BiLevel Masks
  • Tubing:  Compatible with all Standard, Performance, Slim Performance, SlimLine, and ClimateLineAir Heated Tubing.
  • Humidifier: Built-in HumidAir Heated Humidifier
  • Supplemental Oxygen: Up to 4LPM in VAuto Mode, Up to 15LPM in CPAP or BiLevel S Mode (Requires Adapter or Mask with Oxygen Port)

Humidification Specifications

  • Humidifier Capacity:  380 mL to Maximum Fill Line
  • Humidifier Chamber: Standard and Optional Long Life Dishwasher Safe
  • Humidifier CPAP Compatible:  Built-in HumidAir Heated Humidifier
  • Humidifier Notes:  Humidifier plate can be turned OFF, and used as a "cool passover" humidifier, to conserve energy. Humidifier chamber CAN be left empty if heater plate is turned OFF.
  • Humidifier Power:  NA (Built in to CPAP Device)
  • Humidifier Settings:  Off, 1 Minimum to 8 Maximum

Power Specifications

  • AC Power: Universal AC Power:  100-240V, 50-60Hz (Auto Sensing)
  • AC Power Supply:  Yes
  • AC Power Supply Size: 5.50 x 2.00 x 1.25 Inches (Approx.)
  • AC Power Supply Weight: 1.30 Pounds (Approx.)
  • AC Power Supply Cord Length: 12 Feet (Approx.)
  • Power Consumption: 53 Watts Typical; 104 Watts Peak
  • Battery Power: Optional External Accessory